Arrma 1/10 Senton 4x4 Mega Short Course Truck RTR
Sorry, this item is out of stock
This is the Radio Controlled, Electric Powered 1/10 Scale Senton Mega 4x4 Short Course Truck from Arrma. FEATURES: Chassis: Molded plastic with side impact nerf bars, chassis can hold batteries ranging from a 6-cell NiMH to a 4S LiPo pack 6.50" (165mm) long, and 2" (51mm) wide Drive: Four wheel with telescopic sliding composite driveshafts, spring loaded center driveshaft ensures solid engagement with front and rear gearbox inputs Differentials: Composite case construction, 1M straight cut internal gears eliminate shimming or meshing issues, diffs are lubricated with grease, viscosity not specified by manufacturer Suspension: Captured hinge pin type Radio: 2.4GHz Tactic TTX300 3-channel with steering and throttle end point adjustments, steering rate adjustment, user programmable 3rd channel, TR326 receiver with fail/safe Steering Servo: ADS-5 waterproof case, 70oz/in (5kg-cm) of torque, 25T spline Motor: Brush equipped, Mega 12T 550 size Electronic Speed Control: Arrma Mega, compatible with 550 size motors down to 12 turns, handles 5-9 cell NiMH, or 2S LiPo (7.4V) LiPo batteries Shocks: Composite body, coil over, with keyed spring perch and self bleed design, filled with 500cst silicone shock oil, equivalent to around 40wt shock oil from other manufacturers Shock Mounts: Molded plastic Bumpers: Molded composite flexible plastic with shock absorbing loops that attach bumpers to front and rear of chassis Steering: Ball raced steering with fixed molded upper links, servo saver Battery: 8.4V 2400mAh 7-cell NiMH hump configuration, T-plug connector, secured in chassis with two hook and loop straps Battery Charger: ADC-N7 wall charger Battery Tray: 6.5x2.01x1.89" (165x51x48mm) maximum battery dimensions Body: Trimmed and printed Wheels: Nylon construction, five spoke style, black in color, 14mm hex, mounting bead: 2.2" (56mm) outer x 3.0" (76mm) inner Tires: dBoots Fortress multi-surface with foam inserts 1.7" (42mm) wide, 4.1" (104mm) overall diameter Caster: Non-adjustable caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Camber: Non-Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle Spur Gear: 48dp pitch 91 tooth, plastic construction Pinion Gear: 48dp pitch 17 tooth, metal construction Warranty: Two year limited warranty beginning at date of purchase INCLUDES: Assembled Senton Mega 4x4 Short Course Truck with Radio, 3-in-1 Unit, Trimmed Body, Battery, Charger and Instruction Manual REQUIRES: AA Batteries: Four for transmitter Track and maintenance equipment SPECS: Vehicle; Length: 22" (558mm) Width: 11.7" (298mm) Height: 8.2" (208mm) Weight: 6.3lbs (2.9kg) Ground Clearance: 1.26" (32mm) Standard Final Gear Ratio: 9.71 - 18.72 Front Shock Spring Rate: 82gf/mm Rear Shock Spring Rate: 62gf/mm Battery Dimensions: 5.5 x 2 x 1.9" (140 x 51 x 48mm) with battery mounting blocks in place Max Battery Dimensions: 6.50 x 2 x 1.9" (165 x 51 x 48mm) with battery mounting blocks removed Body; Length: 20.7" (527mm) Width: 9.8" (250mm) behind front wheels, narrowest point 11.6" (296mm) at rear wheels, widest point Height: 5.8" (147mm) COMMENTS: Available in the following color schemes; Blue and Black, ARAD61BL Red and Black, ARAD61RL For replacement ball bearings use: Qty. Size Location Qty. Bearing Set 2 12x18x4mm Steering Blocks 1 ARAC3173 2 6x12x4mm Steering Blocks 1 ARAC3144 2 12x18x4mm Rear Hubs 1 ARAC3173 2 6x12x4mm Rear Hubs 1 ARAC3144 2 10x15x4mm Slipper Clutch 1 ARAC3202 2 12x18x4mm Fr Diff 1 ARAC3173 2 10x15x4mm Fr Diff 1 ARAC3202 2 12x18x4mm Rear Diff 1 ARAC3173 2 10x15x4mm Rear Diff 1 ARAC3202 COMMENTS: If powering the vehicle with a 2S LiPo battery, the jumper on the ESC MUST be set to LiPo mode. Face the side of the ESC with the Battery Mode Indication Sticker Place the jumper across the center and left pins when viewing this sticker. *Some aftermarket batteries may require the removal of the Battery Mounting Block for proper fit. This can be accomplished by removing the 3x12mm screw that threads through the chassis and mounting block.